Updating tc35i firmware

Therefore the LED of the FBox will remain green also if not all of the slaves have received the telegram. It has not been observed before the usage of the FBox "SASI S-Bus extended" as there are very few (if at all) reasons for un- and re-assigning a port as gateway master port.IT IS NOT ALLOWED TO DE-ASSIGN A MASTER GATEWAY PORT (an to re-assign it again) on Saia PCD® COSinus systems (PCD3, PCD2. If the master does support the secure data mode, it will use it for all request telegrams it sends on all serial ports.The display filter syntax is not identical to the capture filter syntax.

Note It is also possible to filter the telegrams of an already captured file.

In this case the "display filter" is to be used (refer to FAQ 100535).

The Hayes commands started with AT to indicate the attention from the MODEM.

These commands come from Hayes commands that were used by the Hayes smart modems.

The slave does answer in the same mode as the request is sent, if possible.

If a slave that does not support the secure data mode, it will answer all requests with the standard data mode.modify Register values on the PCD which can lead to malfunction of the application).We therefore recommend whenever possible to use a VPN connection rather than just forwardig ports.Note that since the sent telegram is a broadcast telegram the slaves won't answer with a "ACK" (acknowledgement) telegram.Therefore the LED of the FBox will remain green also if not all of the slaves have received the telegram.The SComm must be running in order to answer these requests.

Tags: , ,